11 May Your computer is configured correctly but the device isn’t …
DNS server issues, which are otherwise net connection errors, are not entirely uncommon. Some users will run the Internet Connection troubleshooter in Windows when there’s a DNS server error. Then they might see this error message within the troubleshooter, Your computer appears to be configured correctly, but the device or resource (DNS server) is not responding.
What to do if your internet doesn’t work as the device or resource (DNS) isn’t responding on Windows? The first step is to reset your router. Occasional IP conflict might be at hand and this step should resolve it. Alternatively, try switching to Google’s DNS server, flushing the DNS cache or updating the Network Adapter driver.
The detailed explanation of each step can be found below.
How to fix Computer configured properly, device or resource not responding
- Reset the Router
- Switch to Google DNS
- Flush the DNS Cache
- Update the Network Adapter Driver
- Turn Off the Windows Defender Firewall
1. Reset the Router
First, try resetting the router. Users can do that by unplugging the router or turning it off. Wait a few minutes, then plug the router back in or turn it on.
2. Switch to Google DNS
Changing the DNS server might fix the “device or resource (DNS server) is not responding” error. Users can switch to the Google DNS service as an alternative to their current DNS. Follow the guidelines below to switch to the Google DNS.
- Press the Windows key + X keyboard to select Run.
- Enter ‘ncpa.cpl’ in the Open box and click OK to open the Control Panel applet shown directly below.
- Right-click your active network adapter and select Properties.
- Select the Internet Protocol Version 4 (TCP/IPv4) and click Properties to open the window in the snapshot directly below.
- Then select the Obtain an IP address automatically radio button.
- Select the Use the following DNS server addresses automatically option.
- Enter ‘184.108.40.206’ in the Preferred DNS server address box.
- Input ‘220.127.116.11’ in the Alternative DNS server addresses box.
- Click the OK button to exit the window.
3. Flush the DNS Cache
- Users have confirmed that flushing the DNS cache can fix the “device or resource is not responding” error. To do that in Windows 10, press the Windows key + S hotkey.
- Enter ‘Command Prompt’ in the search box.
- Right-click Command Prompt to select its Run as administrator option.
- Enter these separate commands in the Prompt, and press Return after entering each one.
- Then close the Command Prompt’s window.
4. Update the Network Adapter Driver
The “device or resource is not responding” error can also be due to an antiquated network adapter driver. So, some users might need to update their network drivers. To do that, click Free Download on Driver Booster 6’s webpage to save the setup wizard for that software.
Open DB 6 after installing it. Thereafter, Driver Booster will automatically scan. Press the Update All button if the scan result includes a network adapter device.
5. Turn Off the Windows Defender Firewall
DNS server errors can also be due to Windows Defender Firewall blocks. So, it might be worth turning off the WDF to check that’s not blocking the connection. Users can turn off the WDF as follows.
- Open Cortana’s search box with the Windows key + S hotkey.
- Enter the keyword ‘firewall’ in the search box.
- Select Windows Defender Firewall to open that Control Panel applet.
- Click Turn Windows Defender Firewall on or off to open more options.
- Then users can select both the Turn off Windows Defender Firewall options to turn off the WDF.
- Select the OK option.
Those are some of the resolutions that might fix the Your computer appears to be configured correctly, but the device or resource (DNS server) is not responding. error to restore the internet connections. Users who have discovered alternative fixes for that error are welcome to share them below.
RELATED ARTICLES TO CHECK OUT: